Golf L4-2.0L DSL Turbo (CJAA) (2010)
/Page-656014.png)
-
Remove noise insulation.
-
Remove the nut - 1 - from lower mounting bolt of starter.
-
Remove wire retainer - 2 -.
-
Remove lower mounting bolt for starter - arrow -.
-
Take the starter out of the vehicle.
Installing:
Install in reverse order of removal, noting the following:
-
Tighten the threaded connections to the specification given in the assembly overview. Refer to => [ Starter, 2.0L TDI, 125 kW, Manual
Transmission MQ350-6F Assembly Overview ] See: .
