Golf L4-2.0L DSL Turbo (CJAA) (2010)
‹› steering column combination switch => [ Steering Column Combination Switch, Vehicles with KESSY ] See: Description and Operation/Steering
Column Switch, Vehicles, From 06.10
‹› Electronic steering column lock control module => [ Electronic Steering Column Lock Control Module, Vehicles with KESSY ] See: Description
and Operation/Steering Column Switch, Vehicles, From 06.10
‹› Base carrier for steering column switches => [ Base Carrier For Steering Column Switches, Vehicles with KESSY ] See: Description and
Operation/Steering Column Switch, Vehicles, From 06.10
Installing:
Install in reverse order of removal.
Steering Column Electronic Systems Control Module, Valeo With KESSY
Steering Column Switch, from 06.10
Steering Column Electronic Systems Control Module, Valeo with KESSY
Removing:
CAUTION!
The removal and installation of individual steering column switch components must be done in the specified sequence. Refer to => [
Steering Column Switch Components with KESSY ]. See: Steering Column Switch Components With KESSY
CAUTION!
‹› The airbag could deploy.
‹› The airbag could deploy if the airbag unit is handled incorrectly.
‹› Observe safety precautions when working on the airbag.
-
Disconnect battery. Refer to => [ Battery, Disconnecting and Connecting ] See: Starting and Charging/Tools and Equipment/Battery,
Disconnecting and Connecting.
Remove the following components in order:
-
Remove steering wheel.
-
Remove steering column trim.
-
Disconnect the connectors - 1 -, - 2 -, - 3 - and - 4 -, depending on the vehicle equipment level.
‹› Do not turn the spiral spring on the steering column electronic systems control module from its center position during removal. The front wheels
must be in the straight-ahead position.