volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Steering Column Switch, Through 05.10|Page 3221 > < Steering Column Switch, Through 05.10|Page 3219
Page 4
background image

‹› The airbag could deploy.

‹› The airbag could deploy if the airbag unit is handled incorrectly. 

‹› Observe safety precautions when working on the airbag.

-

Disconnect battery => [ Battery, Disconnecting and Connecting ] See: Starting and Charging/Tools and Equipment/Battery, Disconnecting and
Connecting.

Remove the following components in order:

-

Remove steering wheel.

-

Remove steering column trim.

-

Remove Steering Column Electronic Systems Control Module. Refer to => [ Steering Column Electronic Systems Control Module ].

‹› When removing, the spiral spring must not be twisted out of the center position and wheels must be in the straight ahead position.

-

Lift straps - arrows - slightly at spiral spring -  1 - and remove spiral spring toward rear from steering column and steering column switches.

Installing:

CAUTION!
The turn signal lever could break when installing the spiral spring. 

The turn signal lever must be in the 0 position when installing the spiral spring so that it does not fall out.

Install in reverse order of removal, noting the following:

‹› When installing spiral spring, spiral spring must be in center position and wheels must be in the straight ahead position.

The following depicts center position of spiral spring, which is dependent on the manufacturer:

‹› The color marked (black square) band - arrow - must be located in viewing window - 1 -.

Steering Column Switch, Through 05.10|Page 3221 > < Steering Column Switch, Through 05.10|Page 3219