Golf L4-2.0L DSL Turbo (CJAA) (2010)
-
Slide the steering column combination switch onto the steering column switch base carrier and install the lower bolt.
-
Slide the electronic steering column lock control module, the steering column switch base carrier and the steering column combination switch all
the way onto the steering column and align them with the threaded holes.
-
Attach the electronic steering column lock control module - 4 - to the steering column using new shear bolts - 1 -.
-
Tighten new shear bolts - 1 - until bolt heads shear off.
-
Install all components in reverse order of removal.
‹› Code the new electronic steering column lock control module. Refer to => [ Electronic Steering Column Lock Control Module with KESSY, from
06.10, Coding ] See: Steering Column Control Module/Testing and Inspection/Electronic Steering Column Lock Control Module With KESSY,
From 06.10, Coding.
Electronic Steering Column Lock Control Module With KESSY
Steering Column Switch, from 06.10
Electronic Steering Column Lock Control Module with KESSY
CAUTION!
When disconnecting and connecting battery, the procedure must be followed as described in the Repair Information. Refer to => [
Battery, Disconnecting and Connecting ] See: Starting and Charging/Tools and Equipment/Battery, Disconnecting and Connecting.
‹› Code the new electronic steering column lock control module. Refer to => [ Electronic Steering Column Lock Control Module with KESSY, from
06.10, Coding ] See: Steering Column Control Module/Testing and Inspection/Electronic Steering Column Lock Control Module With KESSY,
From 06.10, Coding.