Golf L4-2.0L DSL Turbo (CJAA) (2010)
Tie Rod: Service and Repair
All Wheel Drive (AWD)
All Wheel Drive (AWD)
Transverse Link and Tie Rod Assembly Overview
The - arrow - points in driving direction.
1
Eccentric Bolt
‹› After loosening, perform vehicle alignment. Refer to => [ Wheel Alignment ] See: Alignment/Service and Repair/Wheel Alignment.
‹› Do not turn more than 90° right or left (that is smallest to largest possible adjustment).
2
Nut
‹› 95 Nm
‹› Self-locking
‹› When adjusting, can be loosened and tightened up to 5 times.
‹› Always replace after removal.
‹› Always tighten threaded connections in curb weight position. Refer to => [ Rear Axle in Curb Weight Position ]. See: Suspension/Service and
Repair/Removal and Replacement/Rear Suspension/All Wheel Drive (AWD)/Rear Axle In Curb Weight Position
3
Eccentric Washer