Golf L4-2.0L DSL Turbo (CJAA) (2010)
Control Arm Bushing: Service and Repair
Control Arm Bonded Rubber Bushing
Special tools, testers and auxiliary items required
‹› Tube (T10219/1)
‹› Drift (T10219/2)
‹› Thrust plate (VW 402)
‹› Punch (VW 411)
Pressing Out
-
Press out bonded rubber bushings as depicted in the illustration.
1 - (VW 411)
2 - (T10219/1)
3 - (VW 402)
Pressing In
Bonded rubber bushing must be installed at an angle to prevent damaging it when pressing in. Bonded rubber bushing settles straight while pressing
in.
-
Apply installation lubricant (G 294 421 A1) onto outside of bonded rubber bushing.
-
Place bonded rubber bushing on at an angle (in direction of control arm), when doing this the lip - arrow - must slip into hole as shown in the
illustration.