Golf L4-2.0L DSL Turbo (CJAA) (2010)
/Page-822014.png)
-
Mark installation position of mounting bracket on body.
-
Remove bolts - arrows -.
-
Disconnect left rear level control system sensor (G76) connector.
-
Check whether there is a marking (colored point) - arrows - on joint washer or final drive flange. If there is no mark, mark position of joint
washer and final drive flange to each other - arrows -.
-
Disconnect right rear ABS wheel speed sensor ( G44) and left rear ABS wheel speed sensor (G46 ) connectors.
