Golf L4-2.0L DSL Turbo (CJAA) (2010)
15
Bolt
‹› 8 Nm
16
Nut
‹› Self-locking
‹› Always replace after removal.
‹› Always tighten threaded connections in curb weight position. Refer to => [ Rear Axle in Curb Weight Position ]. See: Service and
Repair/Removal and Replacement/Rear Suspension/All Wheel Drive (AWD)/Rear Axle In Curb Weight Position
17
Washer
18
Bolt
‹› 130 Nm + 90° turn
‹› Always replace after removal.
‹› Always tighten threaded connections in curb weight position. Refer to => [ Rear Axle in Curb Weight Position ]. See: Service and
Repair/Removal and Replacement/Rear Suspension/All Wheel Drive (AWD)/Rear Axle In Curb Weight Position
19
Washer
20
Upper Transverse Link
‹› Removing and installing, refer to => [ Upper Transverse Link ] See: Service and Repair/Removal and Replacement/Rear Suspension/All
Wheel Drive (AWD).
21
Washer
22
Nut
‹› Self-locking
‹› Always replace after removal.
23
Wheel Bearing Housing
‹› Removing and installing, refer to => [ Wheel Bearing Housing ] See: Service and Repair/Removal and Replacement/Rear Suspension/All
Wheel Drive (AWD).
24
Washer
25
Bolt
‹› 130 Nm + 90° turn
‹› Always replace after removal.
‹› Always tighten threaded connections in curb weight position. Refer to => [ Rear Axle in Curb Weight Position ]. See: Service and
Repair/Removal and Replacement/Rear Suspension/All Wheel Drive (AWD)/Rear Axle In Curb Weight Position
26
Tie Rod
‹› Opened downward.
‹› Removing and installing, refer to => [ Tie Rod ] See: Service and Repair/Removal and Replacement/Rear Suspension/All Wheel Drive
(AWD).
27
Bolt
‹› 90 Nm + 90° turn