volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Suspension Mode Switch > < Steering Angle Sensor|Service and Repair
Page 1
background image

Suspension Control Pressure Sensor/Switch: Service and Repair

Front Wheel Drive (FWD)

Left Rear Level Control System Sensors

‹› Left rear level control system sensor (G76) for adaptive chassis DCC, removing and installing, refer to => [ Left Rear Level Control System

Sensor, FWD ] See: Ride Height Sensor/Service and Repair/Left Rear Level Control System Sensor, FWD.

Special tools, testers and auxiliary items required

‹› Torque wrench (V.A.G 1783)

Removing

-

Disconnect the connector - 1 -.

-

Remove the bolts - 2 - from the lower transverse link.

-

Remove bolts - arrows - from the subframe.

-

Remove left rear level control system sensor.

Installing

Installation is performed in the reverse order of removal. Observe the following when doing so:

The left rear level control system sensor lever must point toward the outside of the vehicle.

-

After replacing, perform a headlamp basic setting via the Guided Fault Finding function using the Vehicle Diagnosis, Testing, and Information
System (VAS 5051).

Tightening Specifications

Suspension Mode Switch > < Steering Angle Sensor|Service and Repair