Golf L4-2.0L DSL Turbo (CJAA) (2010)
Stabilizer Bar: Service and Repair
Rear Suspension
Stabilizer Bar Assembly Overview
Front Wheel Drive (FWD)
Stabilizer Bar Assembly Overview
1
Stabilizer Bar
‹› Be aware of the various suspension versions. Refer to => [ Vehicle Data Label ] See: Alignment/Description and Operation.
‹› Removing and installing, refer to => [ Stabilizer Bar ] See: Service and Repair/Removal and Replacement/Rear Suspension/Front Wheel Drive
(FWD).
2
Rubber Mount
‹› Replace mounts always on both sides of vehicle.
3
Clamp
4
Bolt
‹› 25 Nm + 45° turn
‹› Tighten uniformly.
‹› Always replace after removal.
‹› Always tighten threaded connections in curb weight position. Refer to => [ Rear Axle in Curb Weight Position ]. See: Service and
Repair/Removal and Replacement/Rear Suspension/Front Wheel Drive (FWD)/Rear Axle In Curb Weight Position
5
Wheel Bearing Housing
6
Nut
‹› 45 Nm