Golf L4-2.0L DSL Turbo (CJAA) (2010)
-
Mount the (T10263/3) - 2 - so that the flat side faces perpendicular to direction of travel.
-
Insert special tools with bonded rubber bushing into subframe as illustrated.
1
Nut (T10263/5)
2
Press piece (T10263/3)
3
Bonded rubber bushing
4
Press piece (T10263/2)
5
Hydraulic Press (VAS 6178 ) with Pressure Head (T10205/13)
6
Nut (T10263/5)
7
Spindle (T10263/4)
-
Pretension special tool with bonded rubber bushing.
-
Carefully insert bonded rubber bushing by operating pump until collar lies on subframe without a gap.
-
Install the rear muffler.
-
Install coil springs. Refer to => [ Coil Spring ]. See: Service and Repair/Removal and Replacement/Rear Suspension/All Wheel Drive