Golf L4-2.0L DSL Turbo (CJAA) (2010)
‹› Observe installation position!
The spring start - arrow - must touch bottom of spring seat.
-
Install spring together with spring seat.
-
Spring seat has a pin on bottom.
-
This pin is inserted into hole of lower transverse link - arrow -.
-
Then insert spring seat at top into upper spring end.
-
Relieve tension on spring, place upper spring seat onto tab of chassis when doing this.
-
Remove spring tensioner.
-
Install wheel and tighten. Refer to => [ Wheel Bolt Tightening Specification ] See: Wheels and Tires/Wheel Fastener/Specifications/Wheel Bolt
Tightening Specification.