Golf L4-2.0L DSL Turbo (CJAA) (2010)
‹› 70 Nm + 90° turn
‹› Always replace after removal.
18
Drive Axle
‹› Removing and installing, refer to:
‹› => [ Drive Axle with CV Joint ] See: Transmission and Drivetrain/Drive Axles, Bearings and Joints/Axle Shaft Assembly/Service and
Repair/Removal and Replacement/Front Suspension/Drive Axle With CV Joint
‹› => [ Left Drive Axle with Mounted CV Joint ] See: Transmission and Drivetrain/Drive Axles, Bearings and Joints/Axle Shaft Assembly/Service
and Repair/Removal and Replacement/Front Suspension/Left Drive Axle With Mounted CV Joint
‹› => [ Right Drive Axle with Mounted CV Joint ] See: Transmission and Drivetrain/Drive Axles, Bearings and Joints/Axle Shaft Assembly/Service
and Repair/Removal and Replacement/Front Suspension/Right Drive Axle With Mounted CV Joint
‹› => [ Drive Axles with Tripod Joint AAR3300i ] See: Transmission and Drivetrain/Drive Axles, Bearings and Joints/Axle Shaft Assembly/Service
and Repair/Removal and Replacement/Front Suspension/Drive Axles With Tripod Joint AAR3300i
19
Nut
‹› 70 Nm + 90° turn
‹› Self-locking
‹› Always replace after removal.
Wheel Bearing Unit, 3-Point Mount
Wheel Bearing Unit, 3-Point Mount
Special tools, testers and auxiliary items required
‹› Torque wrench (V.A.G 1332)
Removing
-
Remove the drive axle bolt. Refer to => [ Drive Axle Twelve-Point Bolt, Loosening and Tightening ] See: Wheel Hub/Axle Nut/Service and
Repair.
‹› Vehicle must not be standing on its wheels when doing this, otherwise wheel bearing will be damaged.
-
Remove wheel.
-
Remove brake caliper and engage on body with wire.
-
Remove ABS wheel speed sensor.
-
Remove disc brake.
-
Press the drive axle out of the hub as far as possible (in direction of transmission).
-
Remove bolts - arrows -.