Golf L4-2.0L DSL Turbo (CJAA) (2010)
-
Wait 10 seconds.
This allows the oil to flow back into the transmission from the filter housing.
-
Remove the air filter housing.
-
After you have installed the filter with the shoulder - arrow - downward, tighten the housing to 20 Nm.
Wipe clean any oil.
-
Raise the vehicle.
-
Remove the noise insulation.
-
Place the (V.A.G 1782) or (V.A.G 1306 ) under the transmission.
-
Remove the inspection plug near the pendulum support - arrow -.