Golf L4-2.0L DSL Turbo (CJAA) (2010)
Shifter M/T: Removal and Replacement
Selector Mechanism Overview, From 03.2009
Selector Mechanism Overview, from 03.2009
CAUTION!
Shift the selector lever into P and engage the parking brake before working with the engine running.
1
Shift Handle with Cover
‹› Do not remove the knob if not necessary. For emergency release, only cover must be removed. Refer to => [ Selector Lever Manual Release ]
See: Procedures.
‹› Pull the locking button past its pressure point before remove the handle. Secure the locking button with a tie wrap or with wire. This prevents
the locking button from being pushed back into knob accidentally.
‹› Removing and installing, refer to => [ Shift Handle with Cover ] See: Shift Handle With Cover.
2
Selector Lever and Mechanism with Cable
‹› With the shift lock solenoid (N110).
‹› Do not grease cable.
‹› Removing and installing, refer to => [ Selector Lever and Mechanism with Cable, from 03.2009 ] See: Selector Lever and Mechanism With
Cable, From 03.2009.
3
Bolt