Golf L4-2.0L DSL Turbo (CJAA) (2010)
-
Press the small lever for the cable rod - arrow - again into the groove before the handle is installed.
-
Lock the handle again after installing it. To do this, press the sleeve under the handle.
-
With new handles, only the transportation safeguard has to be removed. The locking button is already in the installed position.
-
Disconnect the connector from the cover.
-
Pull off the handle upward.
-
Lock the handle again after installing it. Push the sleeve under the handle.
Selector Shaft Lever Seal
Selector Shaft Lever Seal
Special tools, testers and auxiliary items required
‹› Sleeve (VW 423)