Golf L4-2.0L DSL Turbo (CJAA) (2010)
/Page-1508003.png)
‹› Front Passenger Door Control Module, coding
Left Rear Door Control Module, Coding
Control Modules
Left Rear Door Control Module, Coding
-
Connect the vehicle tester. Refer to => [ Vehicle Diagnosis, Testing and Information Systems ] See: Power and Ground Distribution/Wiring
Harness/Service and Repair/Procedures/Vehicle Diagnosis, Testing and Information Systems.
-
On the vehicle diagnosis, testing and information system, select Guided Fault Finding.
-
Using the Go To button, select Functions/Component selection and the following menu options in sequence:
‹› Body
‹› Body repair procedures
‹› Left rear door electronics
‹› Functions of Left Rear Door Control Module
‹› Left Rear Door Control Module, coding
Right Rear Door Control Module, Coding
Control Modules
Right Rear Door Control Module, Coding
-
Connect the vehicle tester. Refer to => [ Vehicle Diagnosis, Testing and Information Systems ] See: Power and Ground Distribution/Wiring
Harness/Service and Repair/Procedures/Vehicle Diagnosis, Testing and Information Systems.
-
On the vehicle diagnosis, testing and information system, select Guided Fault Finding.
-
Using the Go To button, select Functions/Component selection and the following menu options in sequence:
‹› Body
‹› Body repair procedures
‹› Right rear door electronics
‹› Functions of Right Rear Door Control Module
‹› Right Rear Door Control Module, coding
Towing Recognition Control Module, Coding
Control Modules
Towing Recognition Control Module, Coding
This test program is used to code the towing recognition control module.
-
Connect the vehicle tester. Refer to => [ Vehicle Diagnosis, Testing and Information Systems ] See: Power and Ground Distribution/Wiring
Harness/Service and Repair/Procedures/Vehicle Diagnosis, Testing and Information Systems.
-
On the vehicle diagnosis, testing and information system, select Guided Fault Finding.
-
Using the Go To button, select Functions/Component selection and the following menu options in sequence:
