Golf L4-2.0L DSL Turbo (CJAA) (2010)
Front Door Window Motor: Service and Repair
Front Door Window Regulator Motor
Removing
-
Remove front door trim.
-
Fix window using adhesive tape so that it does not slip down.
-
Disconnect the connector - 3 -.
-
Remove the three bolts - 2 -.
-
Remove window regulator motor with control module - 1 - from subframe.
Installation
CAUTION!
It is necessary to code the additional functions and pinch protection each time a new window regulator motor (door control module) is
installed.