Golf L4-2.0L DSL Turbo (CJAA) (2010)
-
Install the window regulator motor - 1 - and pull door window up and down so that splines are located better between motor and cable drum.
Tightening specification for the bolts - 2 -: 3.5 Nm
-
Connect the connectors - 3 -.
-
Code the new window regulator motor using the (VAS 5051 A).
-
After coding, let the window regulator work in the one-touch up/one-touch down mode and pull the switch for 2 seconds. This way the window
regulator recognizes it upper stop.
-
Continue by performing the steps used in removal in reverse order.