Golf L4-2.0L DSL Turbo (CJAA) (2010)
Rear Door Window Motor: Service and Repair
Rear Door Window Regulator Motor
‹› Removing and installing the right window regulator motor is described here. Removing and installing the left window regulator motor is identical.
Removing
-
Remove door trim.
-
Fix window using adhesive tape so that it does not slip down.
-
Remove the three bolts - 2 -.
-
Disconnect the connector - 3 -.
-
Remove window regulator motor with control module - 1 - from subframe.
Installation
CAUTION!
It is necessary to code the additional functions and pinch protection each time a new window regulator motor (door control module) is
installed.