Golf L4-2.0L DSL Turbo (CJAA) (2010)
-
Pull other end - 2 - of cutting cord into interior.
-
Secure other end of cord to (V.A.G 1654 A) - 3 -.
-
Cut window free by moving (V.A.G 1654 A) - 3 - accordingly.
-
While cutting window free, push cutting cord with plastic wedge against window in order to have clearance at window flange.
-
(V.A.G 1654 A) - 3 - can be used in place of (V.A.G 1654) - 3 -
-
As shown in illustration, one suction cup can be removed from the (V.A.G 1654) - 3 -. By doing this, the roller on the (V.A.G 1654 A) - 3 - can be
placed closer to the window flange.
Broken Side Window, Removing
Flush Bonded Windows
Broken Side Window, Removing
The procedure for removing a broken side window is identical to removing a broken rear window. Refer to => [ Damaged Rear Window, Removing ]
See: Service and Repair/Flush Bonded Windows/Damaged Rear Window, Removing
Side Window, Installing
Flush Bonded Windows
Side Window, Installing