Golf L5-2.5L (CBUA) (2010)
Air Cleaner Housing: Service and Repair
Engine Cover With Air Filter
Engine Cover with Air Filter
Removing
-
Disconnect connector - 1 - and intake tube - 2 -.
-
Remove the bolts - 3 - and remove the intake tube from the lock carrier.
-
Pull the engine cover with a jerk out of the mounts first at the front - arrow 1 -, then at the right rear - arrow 2 - and finally at the left rear -
arrow 3 -.
-
Carefully swivel the engine cover out of the rear area.
Installing
‹› Rubber bushings - item 12 - => [ Rubber Bushing ] See: Air Filter Assembly Overview must not be treated with lubricant, neither for assembly in
the air filter nor for assembly on the engine.
-
Position the engine cover correctly in the mounts and press in by hand.
The rest of the installation follows the reverse of the removal procedures.