Golf L5-2.5L (CBUA) (2010)
Wiper Arm: Service and Repair
Wiper Arm
Wiper Arm
Special tools, testers and auxiliary items required
‹› Torque Wrench (V.A.G 1331)
Removing:
-
Allow the wiper to move to the park position.
-
Fold cover cap - 1 - of rear window wiper up and unclip it.
-
Loosen nut - arrow - but do not remove completely.
-
Fold up wiper arm and remove from cone moving it sideways.
-
Remove the nut - arrow - and remove the wiper arm.
Installing:
-
With the ignition on, switch the rear wiper on and off again to move the wiper motor into the park position.
-
Insert wiper arm on wiper arm shaft at approximate rest position and hand-tighten nut - arrow -.
‹› Only tighten the wiper arm mounting nut - arrow - to the specification after adjusting the park position.