Golf (5K1) L5-2.5L (CBUA) (2011)
/l5-2.5l_(cbua)/Page-135001.png)
Radio, Stereo, and Compact Disc: All Technical Service Bulletins
Audio System - Entering/Retrieving Anti-Theft Code
91 10 14
July 13, 2010
2020220, Supersedes T.B. Group 91 number 09-22 dated Sep. 10, 2009 to include new MY 2011 radios including RNS-315 & RCD-310.
Vehicle Information
Condition
Radio, Entering and Retrieving Anti-Theft (SAFE) Code
Anti-theft code needs to be entered into the radio to enable functionality.
Procedure includes coding for vehicles without Gateway and manual radio code generation using ElsaWeb.
Technical Background
The radio requires anti-theft code to be entered in the following scenarios:
^
New vehicle delivery
^
New (replacement) radio installed into a vehicle or radio is installed into a different vehicle
^
Radio is electronically locked (SAFE appears in display) after the incorrect code has been entered twice
^
Electrical repair has been performed on the vehicle which required gateway to be replaced
Production Solution
Not applicable.
Service
Tip:
The radio anti-theft code can only be retrieved through the VAS diagnostic tester or through ElsaWeb. An active online connection and valid GeKo ID
are required.
Vehicles with Gateway:
Retrieve anti-theft code in the tester by selecting and completing the following test plan:
Non Navigation Radios & MY 2004-2008 Navigation radios
^
G >> 56 Radio >> 56 - Anti-theft - coding inquiry
Navigation Radios (RNS-510 & RNS-315)
^
GF>>37 Navigation >> Radio code inquiry
VVVZ number and VIN number will automatically be read out and anti-theft code will be retrieved from the online servers. Anti-theft code must then be
entered into radio as described in Anti-theft Code Entry procedure below.
Vehicles without Gateway OR manual retrieval:
