Golf GL L4-2.0L (AEG) (2001)
-
Remove crankshaft toothed belt sprocket by counterholding sprocket with 3415.
-
To guide seal extractor, screw center bolt into crankshaft onto stop by hand.
-
Unscrew inner part of oil seal extractor 3203 nine turns (approx. 20 mm) out of outer part and lock with knurled screw.
-
Lubricate threaded head of oil seal extractor 3203, place it in position and while exerting firm pressure, screw it as far as possible into oil seal.
-
Loosen knurled screw and turn inner part against crankshaft until oil seal is pulled out.
-
Remove seal from extractor using pliers.
Installing
-
Lightly oil sealing lip of oil seal.