Golf GL L4-2.0L (AEG) (2001)
^
Only coat threads using antiseize compound not containing silicone and marked "safe for oxygen sensors"; do not allow compound to enter
slots on sensor body
^
Remove and install with 3337
11. 4-pin - harness connector
^
Brown
^
Terminals 3 and 4 gold
^
for Oxygen sensor 2 G1 30 and Oxygen sensor heater
12. To center muffler
13. Front exhaust pipe with catalyst
14. 40 Nm (30 ft. lbs.)
^
Always replace
15. Support
16. Gasket
^
Always replace
17. Exhaust manifold
18. Warm air collector plate