Golf GL L4-2.0L (AEG) (2001)
/Page-2499002.png)
- Do not touch glass portion of bulb with bare hands. Even the smallest amount of moisture and/or contaminants from fingers that evaporates on the
bulb during operation can cause the glass to cloud over.
-
Release spring clip -arrow- and remove sealing cover.
-
Disconnect electrical connection -1- from bulb.
-
Push retaining clip -2- over lugs -3- and release.
-
Pull bulb -4- out of reflector.
-
Do not touch bulb glass.
-
Insert new bulb so lugs on bulb plate align with cut-outs in reflector.
-
Connect electrical connector -1-.
-
Install sealing cover.
-
Check headlight (bulb) function.
