volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

With Manufacturer's Scan Tool|Page 4205 > < With Manufacturer's Scan Tool
Page 2
background image

-

Disconnect supply line/hose -1- and collect leaking fuel with a cloth.

WARNING! Fuel system is under pressure! Before opening the system place a cloth around the connection. Then release pressure by carefully

loosening the connection.

-

Connect VAG1318 pressure gauge using adapters VAG1318/10, /11 and /16.

-

Open pressure gauge cut-off valve (handle points in direction of flow (arrow)).

-

Start engine and run at idle speed.

-

Check fuel pressure.
Specified value: approx. 2.5 bar

If the specified value is obtained:

With Manufacturer's Scan Tool|Page 4205 > < With Manufacturer's Scan Tool