Golf GL L4-2.0L (AEG) (2001)
14. Brake disc
15. Dust cap
^
A perfect seal is only achieved using a new dust cap.
16. Self-locking 12-point nut, 175 Nm (129 ft. lbs.)
^
Always replace
17. Wheel hub with wheel bearing
^
Always replace
^
The wheel bearing and wheel hub are installed together in a housing.
^
This wheel bearing/hub unit is maintenance and adjustment free. Adjusting and servicing is not possible!
18. Hex bolt, 60 Nm (44 ft. lbs.)
^
Always replace
19. Shield plate
20. Parking brake cable bracket
21. Parking brake cable
22. Hex bolt, 75 Nm (55 ft. lbs.)
23. Self-locking hex nut, 80 Nm (59 ft. lbs.)
^
Replace each time
^
When tightening nut, the axle beam must be in the horizontal position (unladened vehicle state)
24. Hex head bolt, 80 Nm (59 ft. lbs.)
^
Always replace
25. Rear axle bearing bracket
^
If possible do not loosen when removing the rear axle
26. Hydraulic bonded rubber bushing
27. Bonded rubber bushing
28. Parking brake cable clip
29. Bolt, 20 Nm plus an additional 1/8 turn 45°
^
Always replace
30. Vibration damper
^
Always replace