Golf GL L4-2.0L (AEG) (2001)
-
Kukko 22/2 support -A-.
-
Kukko extractor 21/3 (18.5-23.5mm) -B-
Turbine shaft bushing, removing
With transmission removed, remove bushing from turbine shaft as follows:
-
Remove torque converter.
-
Install extractor 21/3 to support 22/2.
-
Insert extractor into turbine shaft as shown.
-
Adjust size of extractor to size of bushing (do not over-adjust extractor).
-
Remove bushing from transmission.
-
Replace torque converter oil seal on ATF pump (see ElsaWeb, Repair Manual, Repair Group 32 "Torque converter oil seal, removing and
installing".
-
Install new torque converter.
Warranty
Required Parts and Tools