Golf GL L4-2.0L (AEG) (2001)
Fig. 1 Centering clutch disc; removing and installing pressure plate
-
Loosen and tighten bolts gradually and diagonally.
-
Reverse position of retainer 3067 when removing.
Note: Pressure plate contact surface and clutch plate must make full contact with flywheel. Tighten bolts diagonally and evenly to prevent damage
to the centering holes in the pressure plate housing and the centering pins in the flywheel.
Fig. 2 Checking ends of diaphragm spring
-
Wear up to half thickness of the diaphragm spring is permitted.