Golf GL L4-2.0L (AVH) (2002)
-
Remove screws - arrows -.
-
Unclip door trim - 1 - at sides using Disassembly pliers 3392.
-
Lift door trim upward out of window recess.
-
Unclip cable guide - 1 - using a flat screwdriver - 2 -, pull out bracket - 3 - in direction of - arrow - and unhook cable hook - 4 -.
-
Disconnect harness connectors.
Installing
-
Remove window recess seal - 1 - from door trim and insert in window recess.
-
Remainder of installing is reverse of removing.
NOTE:
-
Replace clips before installing door trim.
-
Check plate nut for front upper screw is seated correctly.
-
After connecting battery, check vehicle equipment (radio, clock, electric windows) as per Workshop manual and/or Owners manual
-
If engine Electronic Control Module (ECM) is subject to low voltage with ignition on, DTC memory and Readiness code must be checked