Golf GL L4-2.0L (AVH) (2002)
Apply fallout remover, Finish Kare® Product No. 883 (locally available) to affected areas.
After affected panels have been wetted:
^
Agitate solution on affected surfaces using a clean towel (reapply solution during agitation).
Allow 5 minutes (no longer) for solution to remove fallout.
After 5 minutes:
^
Power/pressure wash vehicle with clear cold water.
^
Dry vehicle.
^
Inspect vehicle paint finish (repeat Step 2 If necessary).
STEP 3: Neutralization and final Cleaning
^
Mix a solution of Finish Kare(R) Product No. 118 SC (locally available) and water.