Golf GL L4-2.0L (AVH) (2002)
The mark (arrow) on the rear of the guide upper section -1- must, on both sides, lie within the marks -dimension a- on the guide rail gate -2-.
The slotted guide rail -2- must be located in the guide rails (cannot be moved by hand).
If not, adjust parallel movement.
-
Place sunroof on from above and install screws (guide rail/panel).
-
Lightly tighten securing screws (Torx T 25).
NOTE: After adjusting panel height tighten securing screws to 4.5 Nm (40 in. lb).