Golf GL L4-2.0L (AVH) (2002)
-
Disconnect 5-pin connector from Mass Air Flow (MAF) sensor -G70- with Intake Air Temperature (IAT) sensor -G42- (arrow).
-
Check for open circuits in wires between test box and the 5-pin connector according to wiring diagram.
Terminal 1 and test box socket 26
Terminal 3 and test box socket 27
Wire resistance: max: 1.5 Ohms
-
Also check wires for short circuits to each other, to vehicle Ground (GND) and to B+.
Specification: Infinity Ohms
If wiring is OK: