volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Main Relay (Computer/Fuel System) > < Engine Control Module (ECM), Replacing|Page 457
Page 7
background image

Wait

Indicated on display (example only):

Channel 50 Adaptation 32000

Q

WVWZZZ3BZ1W0000273

After successful adaptation, Vehicle Identification Number (VIN) is indicated in the lower line of the display.

-

Press -Q- button to confirm input.

Indicated on display:

Channel 50 Adaptation 32000

Q

Store changed value?

-

Press -Q- button to confirm input.

Indicated on display:

Channel 50 Adaptation 32000

->

Changed value is stored

-

Press -> button.

Indicated on display:

Rapid data transfer

HELP

Select function XX

-

Switch off ignition.

-

Switch ignition on again within 60 seconds.

NOTE:  When ignition is switched on for the next time, the identification key of the Engine Control Module (ECM) will be read by the control module
for immobilizer and stored. Engine must not be started again for approximately two minutes.

Main Relay (Computer/Fuel System) > < Engine Control Module (ECM), Replacing|Page 457