Golf GL L4-2.0L (AVH) (2002)
-
Press buttons -1- and -6- to enter "Steering wheel electronics" address word 16.
Indicated on display:
Rapid data transfer
Q
16 Steering Wheel Electronics
-
Confirm entry with Q button.
Indicated on display:
Rapid data transfer
Q
Tester sends address word 16
Check Control Module Versions
Check Control Module Versions
Indicated on display example only):
1J0907487 Steering wheel electron.x28 ->
Coding 00008
WSC 00000
Readout, top line
-
1JO 907 487 See Control module part number
-
Steering wheel electron. = System designation
-
x28 = Software version
Readout, bottom line
-
Coding 00008 = coding number (dependant on model and optional equipment) See: Programming and Relearning
-
WSC 00000 = Workshop code
CAUTION!
Part numbers are for reference only. Always check with your Parts Department for the latest parts information.
-
Press -> button.
NOTE:
If this message appears in the display:
Rapid data transfer
HELP
Control module does not answer
-
Press the HELP button to print out a list of possible malfunction causes.
-
After correcting malfunctions, re-enter address word 16 for Steering wheel electronics and press -Q- button to confirm input.
Indicated on display:
1JO035152 Radio
0001 ->
Coding 04403
WSC 00000
-
Press -> button.
Indicated on display (select function):
Rapid data transfer
HELP
Select function XX
Output Diagnostic Test Mode (DTM) (Function 03)
Output Diagnostic Test Mode (DTM) (Function 03)
The Output Diagnostic Test Mode (DTM) is part of the electrical check.
The DTC memory must be checked after the Output Diagnostic Test Mode (DTM).
Output Diagnostic Test Mode (DTM), initiating