Golf GL L4-2.0L (AVH) (2002)
NOTE: To tighten 12-point nut use wrench VAG 1756:
-
-Tighten 12 point nut to 200 Nm (148 ft. lbs.) and loosen 1/2 turn.
-
-Tighten 12 point nut to 50 Nm (37 ft. lbs.) + turn an additional 60°.
If wrench is not available, 12-point nut can be tightened as follows.
-
Tighten 12-point nut to 200 Nm (148 ft. lbs.) + loosen 1/2 turn (180°).
-
Mark point on nut with line (arrow A).
-
Mark 2nd line (arrow B) on edge of wheel hub 60° from first point.
-
Tighten 12-point nut until points A and B align.