Golf GL L4-2.0L (AVH) (2002)
-
Connect multi-pin connector to TCM -J217- pins (arrows) and lock connector.
-
Performing On Board Diagnostic (OBD). See: Transmission Control Systems/Testing and Inspection/Scan Tool Testing and Procedures/Scan
Tool Testing - 4 Speed Automatic 01M/Scan Tool Connecting and Initial Checks/Connecting VAG 1551 Scan Tool
-
Initiating basic setting. See: Transmission Control Systems/Testing and Inspection/Programming and Relearning/Programming Trans Control
Module (Basic Setting, Initiating) - 4 Speed Automatic 01M
Transmission Control Module (TCM) -J217- 68-pin connector assignment (socket numbers on VAG 1598/18)
1
-
Ground (terminal 31)
2
-
Vacant
3
-
CAN-Bus Low input and output signals
4
-
Vacant
5
-
Vacant
6
-
Transmission Fluid Temperature Sensor -G93-
7
-
Vacant
8
-
Vacant
9
-
Solenoid valve 3 -N90-
10
-
Solenoid valve 7 -N94-
11
-
Park/neutral signal
12
-
Vacant
13
-
Vacant
14
-
Vacant
15
-
Brake Light Switch -F- signal voltage
16
-
kick Down Switch -F8-
17
-
Vacant
18
-
Multi-Function TR Switch -F125- (pin 5)
19
-
Vacant
20
-
Vehicle Speed Sensor -G68-
21
-
Transmission Vehicle Speed Sensor -G38-
22
-
Solenoid valve 6 -N93- supply voltage
23
-
Supply voltage (terminal 15)
24
-
OBD K-wire
25
-
CAN-Bus High input and output signals
26
-
Vacant
27
-
Vacant
28
-
Vacant
29
-
Shift Lock Solenoid -N110-
30
-
Vacant
31
-
Vacant
32
-
Vacant
33
-
Vacant
34
-
Vacant
35
-
Vacant
36
-
Vacant
37
-
Vacant
38
-
Vacant
39
-
Vacant
40
-
Multi-Function TR Switch -F125- (pin 2)