Golf GL L4-2.0L (AZG) (2001)
Front wheel speed sensor wiring, removing and installing
Required special tools and equipment
^
VAS 1978 wiring repair set
Removing
^
Obtain radio code on vehicles with coded radio.
^
Disconnect battery.
^
Remove Mass Air Flow (MAF) sensor connector -1- from air filter duct.
^
Remove bolts -2- at air filter -3- and place filter to left side.
^
On vehicles with Diesel engines, remove relay panel above brake booster.
-
Release connector from control module (arrow -1-) and pull off (arrow -2-)