Golf GL L4-2.0L (AZG) (2001)
Special Tools:
Section A
Section A - Check ABS Control Module Part Number
^
Connect VAS 5051 to data link connector located under the dash panel, outward of the steering column
^
Switch ignition to "ON" position
^
On the VAS 5051 Start-Up screen, press "Vehicle Self Diagnosis" button
^
Select "03 - Brake Electronics."
^
Read control module part number and code located in the upper right corner of the screen
^
If ABS control unit part number is 1C0 907 379 C, press <-- button, select "06 - End output", disconnect VAS 5051, turn ignition to "OFF" position
and proceed to Section B
^
If ABS control unit part number is not 1C0 907 379 C no further work is required, press <-- button, select "06 - End output", disconnect VAS 5051
from vehicle and turn ignition to "OFF" position
Section B
Section B - Check ABS Control Module Supplier Code
^
Drive vehicle into hoist area
^
Raise vehicle on hoist