Golf GL L4-2.0L (AZG) (2001)
Installing
NOTE:
-
Cable sleeve ends are color coded.
-
All air flaps must audibly move onto end stops when turning controls.
-
Always check cables before installing. Replace binding or damaged cables.
-
Hold cable end -1- at an angle and press onto control lever -2-, -arrow-.
-
Insert footwell/defrost flap cable, temperature flap cable, temperature flap cable and central flap cable -1- into clip -2- and press in to stop.
Cable sleeve end color code:
-
Footwell/defroster flap: green
-
Center flap: yellow
-
Temperature flap: beige
Disassembly and Assembly