Golf GL L4-2.0L (AZG) (2001)
Control Assembly: Description and Operation
CAUTION! Before working on the electrical system:
-
Get radio anti-theft code.
-
Disconnect battery Ground (GND) strap.
NOTES:
-
After reconnecting battery:
-
Reactivate vehicle equipment such as radio, clock and power windows as per Repair Manual and/or Owner's Manual.
-
Activate readiness code
1
-
Windshield defrost button
2
-
Blower speed display
-
In automatic operation -8-, a mid-range is displayed independent of actual blower speed.
3
-
Ambient (outside) temperature display
-
Display will not change when road speed is below 15 km/h (9.5 mph) and coolant temperature is above 70 °C (158 °F). Under these
conditions the actual measured value is not shown because at low road speed the radiant heat from the vehicle engine will cause a false
reading.
4
-
Windshield defrost display
5
-
Air recirculation display
6
-
Air distribution display
-
Function "air flow to footwell" is displayed or goes out when pressing button -14-.
-
Function "air flow to upper body" is displayed or goes out when pressing button -15-.
7
-
Selected temperature display
-
To change from degrees Celsius to Fahrenheit and vise versa:
-
Press and hold button -11- and press button -9-.
-
Selected temperature scale appears in display.
8
-
Operating mode display
"AUTO": Automatic mode
-
In automatic mode the Climatronic maintains the selected inside temperature automatically. With this setting, the air outlet air temperature,
the blower speed and the air distribution are controlled automatically.
"ECON": A/C system off
-
In ECON mode only the compressor is switched off. Heating and air distribution continue to be controlled automatically.
"OFF": Complete system is switched off
-
Switch off with button -17-.
-
In this mode, all flaps remain in the last set position before switching off. (Setting should only be used in case of a malfunction).