Golf GL L4-2.0L (AZG) (2001)
-
Adaptation can be interrupted with the "C" button of the VAG 1551.
-
Correcting a false entry which has been confirmed is not possible. The instrument cluster must be exchanged for a new one.
-
Adaptation value must be entered in kilometers. For US models, adaptation value must be converted from miles to kilometers first (miles x 1.609 =
kilometers).
Adaptation, example
The malfunctioning instrument cluster has an odometer reading of 89627 km. This reading is transferred to the new instrument cluster as follows:
-
Connect scan tool VAG 1551, select operating mode 1 "Rapid data transfer", switch on ignition and enter address word 17 "instrument cluster".
-
Press -Q- button to confirm input.
-
Press -> button until "Select function"is displayed..
NOTE: Login procedure is only needed for VDO instrument clusters. On Motometer instrument clusters, adaptation functions can be selected
immediately.
Indicated on display:
Rapid data transfer
HELP
Select function XX
-
Press button -1- twice to select "Login" function 11.
-
Press -Q- button to confirm input.
Indicated on display:
Rapid data transfer
Q
11 - Login procedure
-
Press -Q- button to confirm input.
Indicated on display:
Login procedure
Q
Enter code number XXXXX
-
Enter code number 13861.
Indicated on display:
Login procedure
Q
Enter code number 13861
"FAIL" appears in odometer if a false code or secret number is entered 3 times.
In this case terminal 30 (battery) must be disconnected and reconnected again and the Login procedure repeated using the correct code number.
-
Press -Q- button to confirm input.
Indicated on display:
Rapid data transfer
HELP
Select function XX
-
Press buttons -1- and -0- to select "Adaptation" function 10.
Indicated on display:
Rapid data transfer
Q
10 - Adaptation
-
Press -Q- button to confirm input.
Indicated on display:
Adaptation
Enter channel number XX