Golf GL L4-2.0L (AZG) (2001)
-
Turn crankshaft to cyl. 1 TDC (arrows).
-
Install engine mounts (replace bolts).
-
Align engine and transmission mounts.
-
Install overflow reservoir for coolant. Torque to 10 Nm (7 ft. lbs.).
-
Install reservoir for power steering fluid. Torque to 10 Nm (7 ft. lbs.).
-
Place camshaft drive belt on tensioning roller and camshaft sprocket and tension.
-
Remove 10-222 A support.
B - Camshaft drive belt, removed from camshaft sprocket only
Requirement
^
Pistons must NOT be positioned at TDC.
Work sequence
-
Align mark on camshaft with line on camshaft drive belt guard.
-
Turn crankshaft to TDC cyl. 1.
-
Place camshaft drive belt on camshaft sprocket and tension.
Camshaft drive belt, tensioning
Requirements