Golf GL L4-2.0L (AZG) (2001)
Valve Body: Service and Repair
5 Speed Automatic 09A
Servicing
Valve body, servicing
Sequence for removing and installing
CAUTION: Do not run file engine or tow the vehicle with the valve body cover removed or when there is no ATF in the transmission.
Note:
-
The valve body or the solenoid valve wiring harness can also be removed with the transmission installed.
-
Always replace a valve body which is fouled or faulty.
1. Plug, 15 Nm
-
Always replace seal = Fig. 1
-
Checking ATF level and topping up
2. Overflow pipe
3. Drain plug, 40 Nm
-
Only remove if oil is to be drained
-
Removing = Fig. 3
4. Oil seal
-
Always replace
5. Transmission - housing