Golf GL L4-2.0L (AZG) (2001)
Clutch Release Fork: Service and Repair
5 Speed Manual 02J
Clutch release mechanism, servicing
1. Transmission
2. Ball stud, 25 Nm
-
Lubricate with MoS2 grease
3. Input shaft oil seal
-
Replacing
4. Guide sleeve
-
With vulcanized O-ring
-
If damaged replace guide sleeve and O-ring together
-
Lubricate guide sleeve in area of release bearing with MoS2 grease
5. Retaining spring
-
Secure to clutch release lever
6. Securing bolt, 20 Nm
7. Clutch release lever
8. Release bearing
-
Do not wash out bearing, only wipe
-
Replace noisy bearings
-
Lubricate surfaces which contact release lever with MoS2 grease
9. Securing bolt, 20 Nm
10. Slave cylinder
-
Removing and installing
11. Plunger
-
Grease end of plunger with MoS2 grease
12. Assembly bolt
-
Secures clutch release lever when installing transmission
-
Unscrew after transmission has been installed