Golf GLS L4-2.0L (AEG) (2001)
Gas Strut, Rear Lid: Removal and Replacement
Gas-filled Strut, Removing
-
Support rear lid.
-
Lift securing clip - 2 - using a screwdriver and remove gas-filled strut from ball stud - 1 -.
1. Combi ball stud, 15 Nm
2. Securing clip
3. Gas-filled strut
4. Bolt
5. Ball stud
NOTE:
-
When re-using gas-filled strut, securing clip - 2 - must not be removed completely out of ball socket, otherwise securing clip may be damaged.
-
For a smaller lid opening angle, there is option to install shorter gas-filled struts (about 20 mm). This results in an opening height of approx.
175 cm.