Golf GLS L4-2.0L (AEG) (2001)
-
Place winding device VAG 1654 in "Position I".
-
Move winding device according to position required and cut window free.
NOTE: Press cutting thread against window glass with plastic wedge during cutting process, in order to have clearance at window flange.
Broken Rear Window, Removing
WARNING!
Always wear protective goggles and leather gloves.
-
Cover areas of body and interior to protect against damage from glass splinters.
-
Remove pieces of glass up to adhesive sealing material.
-
Disconnect wiring connectors for heated rear window and antenna.
-
Cover flange -2- all around with textile reinforced adhesive tape.
-
Cut through adhesive sealing material (with remainders of glass) in window opening with electric cutter and blade VAG 1561/10 (with stop roller).
Rear Window, Installing
Preparing old undamaged window for glazing See: Related Information For All Flush Bonded Windows/Preparing Removed Undamaged Window For
Installation
Preparing new window for glazing See: Related Information For All Flush Bonded Windows/Preparing New Window For Glazing
Preparing body flange for glazing See: Related Information For All Flush Bonded Windows/Preparing Body Flange For Glass Installation
Installation instructions See: Related Information For All Flush Bonded Windows/Installation Instructions
Curing time See: Related Information For All Flush Bonded Windows/Curing Time