Golf GLS L4-2.0L (AEG) (2001)
-
Install camshaft gear. To tighten the bolt, hold the camshaft gear secure using the Counter Support -3415-.
-
Tightening torque: 100 Nm
Note:
If the camshaft is turned the crankshaft may not be in TDC. Danger of damaging to valves/piston head.
Perform remaining installation operations in reverse order of removal.
Installing the toothed belt and adjusting the timing, refer to Toothed Belt, Removing, Installing and Tensioning See: Timing Components/Timing Belt